AdmiralMH
Regular Member
((Is it finalized if the story has to be like star wars? or can we change history through what we do.))
MH gets in and turns on a hologram displaying the process. "A crowbar designed for repairing heavy vehicles and a concussion rifle is required. Concussion rifles work best they are sometimes hard to find denpening on what as available, but other heavy weapons can be used too, and the crowbar has to be meant for heavy vehicles because otherwise it would break."
"With a little force the crowbar can be pushed between the two door parts which can be a lock or just the doors, if there is no attachment point you can use a fusion cutter to cut into a wall to find a place, the doors will only move a little but then it won't budge any further, they were designed that way for strategic reasons. When the crowbar is in, and make sure your armor is on because the crowbar might go flying, you charge up the gun and blast the crowbar at the right place to break the locking bar inside the door frame or door. Although the lock is made of a metal that won't break easily, the moving parts of the lock that aren't designed to take much impact will break easily from a heavy gun."
"In simple words we are breaking the lock's moving parts by sticking in a crowbar and blasting the crowbar in an angle that breaks the lock off because the weaker parts have been broken, after this is done the door with a little effort can be pushed as far open is it can go without jamming in a broken part depending on where the lock was. I made up this trick by examining the door parts and design and came up with a way to counter it."
MH gets in and turns on a hologram displaying the process. "A crowbar designed for repairing heavy vehicles and a concussion rifle is required. Concussion rifles work best they are sometimes hard to find denpening on what as available, but other heavy weapons can be used too, and the crowbar has to be meant for heavy vehicles because otherwise it would break."
"With a little force the crowbar can be pushed between the two door parts which can be a lock or just the doors, if there is no attachment point you can use a fusion cutter to cut into a wall to find a place, the doors will only move a little but then it won't budge any further, they were designed that way for strategic reasons. When the crowbar is in, and make sure your armor is on because the crowbar might go flying, you charge up the gun and blast the crowbar at the right place to break the locking bar inside the door frame or door. Although the lock is made of a metal that won't break easily, the moving parts of the lock that aren't designed to take much impact will break easily from a heavy gun."
"In simple words we are breaking the lock's moving parts by sticking in a crowbar and blasting the crowbar in an angle that breaks the lock off because the weaker parts have been broken, after this is done the door with a little effort can be pushed as far open is it can go without jamming in a broken part depending on where the lock was. I made up this trick by examining the door parts and design and came up with a way to counter it."
Last edited by a moderator:
Upvote
0