Hi again!
I dont have my siggy in as it is magnified well beyond it's size as I see all siggy's are.
It's a problem or well, in reports; it blows away the comments we write so if I say, no violation, it's just a small sentence comparitively below or above a huge siggy, I believe it's below; so we will miss comments more than likely.
As well it's just out of proportion and siggys are highly magnified.
My siggy is:
589 pixels wide
302 pixels high
96 dpi on horizontal and vertical resolution
32 bit depth
3 frame count
prior to upgrade it centered and was quite the right size, tho a tad big, wasn't overbearing iirc and not as big as all in siggies is being magnified which is why that text is taking over. It's not the users making it big imo, it's preset in siggy software area I believe to magnify.
I'll copy my siggy in this text area which should give a good idea of the normal size, if it works properly, though I've no clue.
Then I'll add it into my siggy for the next post so you can see how it's magnified.
Meanwhile - I'm keeping it off as have read others saying siggys are way too big. I can get it resized of course, but I think it's just a magnification preset that's doing this to all siggys. As most text siggys (mine isn't a line of text), but most were in the same font I'm typing in, and you'll note they are all huge in siggys and it's not the members making it that way imo.
So here's a copy of my siggy..hopefully shows as truly is, will also attach thumbnail.
Thanks,
tapero
PS I used to be only one would email techs when cf was down for over a year, (me and Erwin) and so very used to looking for things which didn't work when sys came back up so that the techs would know what problems were occuring or what new bugs there were...so hehe, that's why I'm always here, as is manner of habit. Hope I don't drive you nuts!
ok, i was about to copy siggy in this text area, and can not as would have to insert
ok, no good, as need url from gwenyfur who created it.. it does look big in the fax viewer which is what my pictures opens it up in, but in pre upgrade was proportional to page and siggy area, was not huge was not small, was just right.
so I'll do the thumbnail here.
ah, am losing my mind.. now can't figure how I did thumbnail in last thread, so will just do next post showing what my siggy looks like..if I get attachments showing will also enter it there.
I dont have my siggy in as it is magnified well beyond it's size as I see all siggy's are.
It's a problem or well, in reports; it blows away the comments we write so if I say, no violation, it's just a small sentence comparitively below or above a huge siggy, I believe it's below; so we will miss comments more than likely.
As well it's just out of proportion and siggys are highly magnified.
My siggy is:
589 pixels wide
302 pixels high
96 dpi on horizontal and vertical resolution
32 bit depth
3 frame count
prior to upgrade it centered and was quite the right size, tho a tad big, wasn't overbearing iirc and not as big as all in siggies is being magnified which is why that text is taking over. It's not the users making it big imo, it's preset in siggy software area I believe to magnify.
I'll copy my siggy in this text area which should give a good idea of the normal size, if it works properly, though I've no clue.
Then I'll add it into my siggy for the next post so you can see how it's magnified.
Meanwhile - I'm keeping it off as have read others saying siggys are way too big. I can get it resized of course, but I think it's just a magnification preset that's doing this to all siggys. As most text siggys (mine isn't a line of text), but most were in the same font I'm typing in, and you'll note they are all huge in siggys and it's not the members making it that way imo.
So here's a copy of my siggy..hopefully shows as truly is, will also attach thumbnail.
Thanks,
tapero
PS I used to be only one would email techs when cf was down for over a year, (me and Erwin) and so very used to looking for things which didn't work when sys came back up so that the techs would know what problems were occuring or what new bugs there were...so hehe, that's why I'm always here, as is manner of habit. Hope I don't drive you nuts!
ok, i was about to copy siggy in this text area, and can not as would have to insert
ok, no good, as need url from gwenyfur who created it.. it does look big in the fax viewer which is what my pictures opens it up in, but in pre upgrade was proportional to page and siggy area, was not huge was not small, was just right.
so I'll do the thumbnail here.
ah, am losing my mind.. now can't figure how I did thumbnail in last thread, so will just do next post showing what my siggy looks like..if I get attachments showing will also enter it there.
