None of my systems are terribly impressive, but then I have yet to actually spend money on them =
---
colin@inle:~#
Intergraph TDZ2000 (basically just the case now - most of the internals have been tinkered with)
2x PII 450MHz
640MB RAM
~100GB HD (several SCSI drives, mounted internally and in an external case)
Running FreeBSD 5.4, tracking -RELENG
'NV5 TNT2 Model 64 / TNT2 Model 64 Pro'
'Rage 3D Pro PCI (PQFP Package)'
'LSI53C895 PCI to Ultra2 SCSI I/O Processor with LVD Link'
'3C905B-TX Fast Etherlink 10/100 PCI TX NIC'
'EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL'
'GeForce4 MX 440 [NV17.2]'
This is my development workstation. It's currently running with two 19" monitors - I'm looking for a third =
---
colin@bigwig:~#
350MHz AMD K6-2 (underclocked)
192MB RAM
1GB HD
Running pfSense from CVS.
'DP83815/16 Fast Ethernet Adapter (MacPhyter/MacPhyter-II)'
'DP83815/16 Fast Ethernet Adapter (MacPhyter/MacPhyter-II)'
'DP83815/16 Fast Ethernet Adapter (MacPhyter/MacPhyter-II)'
'86C362/86C368 Trio3D2x & Trio3D2x+ AGP / Trio3D2x & Trio3D2x+ 8MB'
This is my primary firewall, and will be replaced soonish with a Soekris 4801 to save power and space.
---
colin@vervain:~#
350MHz AMD K6-2 (also underclocked)
192MB RAM
1GB HD
Running pfSense from CVS.
Can't run pciconf, as holly is currently powered down.
This is my backup firewall, and will also be replaced by a Soekris 4801.
---
colin@dandelion:~#
400MHz Intel Celeron
256MB RAM
48GB total HD (8GB master + 40GB slave)
Running FreeBSD 5.4, tracking RELENG.
dandelion is also powered down - no pciconf for you =
---
colin@kehaar:~#
Linksys WRT54G
Running OpenWRT experimental (my only Linux system, actually).
I basically use kehaar as a dumb AP connected to my pfSense systems. Once I get a couple of WRAP boards, I may use this as a kismet monitor or find something else creative to do with it.
---
I also have a few Newtons, an old laptop, a bunch of Macs, etc. A few systems I own are not listed due to being in various stages of construction/upgrade.